INSTRUCTIONS Braun Syncro 7000 & Flex Integral 5441 Series Clean and Charge Stand Housing Replacement Step1: Remove the cleaning cartridge Step 2: Grasp the arm on the top housing in one hand and the bottom of the base in the other hand. Step 3: Gently and steadily pull the two pieces apart at the seam. There are four tabs holding the two pieces together that need to disconnect. Step 4: Once the two pieces are separated, you need to disconnect a small wire harness from the bottom half of the unit. Step 5: Plug the wire harness from the new top housing into the bottom half. Step 6: Line up the tabs on the top housing to the appropriate place on the bottom half of the unit. Make sure the 3 clear prongs on the top housing fit into the lighting system for the charge, clean, and cartridge selector. Step 7: Compress the top and housing onto the bottom half until the tabs lock in place. |
|